29.Answering callsFollow these procedures to answer calls. Incoming calls cause thetelephone to ring and the Message Indicator lamp to flash.The IP Phone 1110 does not have a handsfree feature. You can answera call by pressing the Line key, or by picking up the handset. You mustuse the handset to speak to the caller. See Figure 1 "IP Phone 1110components" (page 10) for the location of the Line key.Answering a callFollow this procedure to answer a call.ActionPerform one of these actions to answer a call:• Lift the handset and begin speaking.• Press the Line key, then lift the handset and begin speaking.Answering a second callFollow this procedure to answer a call when you are engaged in a call.If another call comes in while the primary line is engaged, the phonesounds and a message indicator icon on the display flashes. While theindicator is flashing you have the opportunity to put the first call on holdand answer the second call.Step Action1 Press the hold key to put the active call on hold.2 Perform one of these actions:Carrier VoIPNortel IP Phone 1110 User Guide (CICM)NN10300-021 02.03 Standard7 March 2008Copyright © 2007, 2008 Nortel Networks.
