95.Using the dialpad to enter textSome screens require you to enter text in order to perform an action, suchas changing your password or entering names in the directory. To entertext you use the dialpad on the terminal.On the dialpad, keys numbered 2 through 9 each have three lettersassociated with them. When entering text, press the key once to enter thefirst letter, twice to enter the second letter, and three times to enter thethird letter. No letters are associated with the number 1 or the 0 keys.You can only enter text in the display when you see a flashing cursorin the information line above the softkeys. For example, When you arecreating a directory entry, you will see this on the Surname screen.Step Action1 Perform one of these actions to enter letters.• To enter the first letter listed on a key, press the key once.• To enter the second letter listed on a key, press the keytwice.• To enter the third letter listed on the key, press the key threetimes.2 To enter special characters, perform these steps. See Figure 5"Procedure job aid" (page 96) for a list of available symbols.a Press Symbol.A list of symbols opens.b Use the navigation keys to scroll through the list and selectthe symbol.c Press Ok or press the send key, to add the symbol to the textstring.--End--Carrier VoIPNortel IP Phone 1110 User Guide (CICM)NN10300-021 02.03 Standard7 March 2008Copyright © 2007, 2008 Nortel Networks.
