34 While on an active callStep Action1 During a call, press the key to which the transfer feature isassigned.The call is put on hold and a dial tone sounds.2 Use the dialpad to enter the number to which to transfer the call.3 When that number rings or is answered, press the transfer keyagain.The call is transferred.--End--Using conference callFollow this procedure to engage in a conference call.The Three Way Call (3WC) feature allows you to add three calls to aconference. If six port conference is available, you can add a maximum ofsix calls to a conference. If six port conference is available, 6WC appearsbeside a feature key in the display.Step Action1 During a call, press the key to which the conference call featureis assigned, either 3WC or 6WC.The call is put on hold and a dial tone sounds. On the display,an indicator flashes beside the line on which the call is held.2 Dial the number of the person you want to add to the call.At this time, you can talk privately to the person you are adding,to announce the conference.3 Press the conference key again to merge the calls.4 Repeat steps 2 and 3, to add more calls to the conference.5 If you make a mistake dialing, or a party does not want tobe included in the conference, press the softkey with the DNassigned, select the DN from the Call Services list, or press theline key.--End--Carrier VoIPNortel IP Phone 1110 User Guide (CICM)NN10300-021 02.03 Standard7 March 2008Copyright © 2007, 2008 Nortel Networks.
