Configuring Telephone Options68Enabling OnHook Default PathThe OnHook Default Path option allows you to choose whether to use aheadset or the Handsfree feature to operate your IP Phone while it is on-hook. To enable OnHook Default Path, press the Services key, selectTelephone Options, and then select On hook default path.To enable OnHook Default Path:Changing feature key labelsThe Change FeatureKey label option renames the label displayed nextto each feature key or restores the default labels to the keys (collectivelyor individually). To rename feature key labels, press the Services key,select Telephone Options, and then select Change FeatureKey label.Note: If a feature key is configured as an auto-dial key, the label doesnot change if the auto-dial key configuration changes.To rename the labels:1. Press the Up/Down navigation keys tohighlight one of the following:— Handsfree enable— Headset enableEnter 2. Choose one of the following:— Press the Select soft key or Enterkey to save the default path, andreturn to the Telephone Optionsmenu.— Press the Cancel soft key to keepexisting configurations.1. Select the Change FeatureKey labeloption.orSelect Cancel
