28 Getting StartedNN47250-101 (320665-G Version 02.01)By default, a username and password are not required to access WMS Services from WMS client. Youcan configure user accounts for administrative, provisioning, and monitoring access. (Refer to “WLANManagement Software Access Control” on page 29.)2 Configure the following options by clicking Server Settings on the left of the browser window:• Enter the desired HTTPS Server Port in the HTTPS Server Port field. The HTTPS ServerPort is the port on which WMS Services listens for requests from WMS client.• Enter the desired HTTP Server Port in the SNMP. The SNMP Server Port is the port on whichSNMP traps are received. Select the trap type from which you want WMS Services to receiveWSSs, SNMPv1 or SNMPv3.Note. On each switch in the network plan, you must enable notifications andconfigure WMS Services as a notification target (trap receiver).Note. WMS Services does not start listening for SNMP notifications fromswitches until you save the network plan.
