Getting Started 29Nortel WLAN Management Software 2300 Series User Guide• Specify the security settings in the Key Store area.The Auto-Config IP Subnet Matching option is used for field replacement of WSSs. For information, refer to “Config-uring WSSs Remotely” in the Nortel WLAN Management Software 2300 Series Reference Guide.Click Access Control on the left to define user accounts. For more information about access control, refer to “WLANManagement Software Access Control” on page 29.To select monitoring settingsAll monitoring options are enabled by default. You do not need to enable them and you do not need to specify theswitches you want to monitor. However, for WMS Services to receive trap data from WSS switches, SNMP notifica-tions must be enabled and WMS Services must be configured as a notification target on each of the switches.To start gathering data for monitoring, deploy your configuration to the network. For information about deploying yourconfiguration, refer to “Deploy Your Configuration” on page 162.WLAN Management Software Access ControlYou can create a user account with administrator, provision, or monitor privileges. See Table 4 for basic privilege defi-nitions. For a details, refer to “Restricting Access to WMS” in “Getting Started” of the Nortel WLAN ManagementSoftware 2300 Series Reference Guide.To configure access control1 Select Services > Setup from the WMS main tool bar. WMS Services is displayed in your default Webbrowser.2 Select Access Control in the left pane.3 Click Enable login-required. Enter a username and password for administrative access. Click OK. (Youmust configure an admin account before you can configure provisioning or monitoring users.).4 Enter the name under the Add User section.5 Select Administrator, Provisioning User, or Monitoring User in the Role field.6 Enter the password. Re-enter the password.7 Click Save. The new account will appear in the Authorized Users section.8 To remove an account, click Delete.9 To reset a password, click Edit.Table 4: User Privilege LevelsPrivilege Level Access Control Configuration MonitoringAdministrator yes yes yesProvision no yes yesMonitor no no yes