Nortel 2382 Configuration Manual

Also see for 2350: Configuration guide Read me Quick start guide User guide Reference guide

Contents

WSS overview 27Nortel WLAN—Security Switch 2300 Series Installation and Basic Configuration GuideAP (port 2 only) Solid green For an AP’s active link, with PoE enabled,all the following are true:• AP has booted.• AP has received a valid configurationfrom the WSS.• Management link with an AP isoperational.Alternating green andamberAP is booting with an image received fromthe WSS.If the LED remains in this state indefinitely,the boot or configuration attempt has failed.Solid amber PoE is on but no AP is connected to the link.Blinking amber AP is not connected or is unresponsive, orthere is a PoE problem.Unlit Port is not configured as an AP access port,or PoE is off.Table 3: WSS Status LEDs—WSS 2350 (continued)LED Appearance Meaning