cfg/vpn /sslclient/mobility Mobility configuration 419/cfg/ vpn #/syslog Syslog VPN configuration[Syslog Per VPN Menu]list - List all valuesdel - Delete a value by numberadd - Add a new valueinsert - Insert a new valuemove - Move a value by numberUsing this menu, syslog can be configured per VPN. All VPN specificsyslog messages are sent to both the global syslog and the VPN syslog.Note: Per syslog VPN is available only with SSP license.Table 169Syslog Per VPN Menu (/cfg/ vpn #/syslog)Command usage syntaxlistDisplays all configured VPN by their index number, IP address, and facility number.del Removes the specified VPN syslog from the system configuration. Use the listcommand to display the index numbers of all added VPN syslog.add Adds a VPN syslog to the system configuration. When adding a VPN syslog you willbe prompted for both the IP address and the local facility number. The local facilitynumber can be used to uniquely identify syslog entries.insertfacility number>Assigns a specific index number to the VPN syslog you add. The index numberyou specify must be in use. VPN syslogs with an index number higher than (andincluding) the one you specify will have their current index number incremented by 1.insertMoves a VPN syslog up or down in the list of configured servers. The index numbersyou specify must be in use. To view all VPN syslogs currently added to the systemconfiguration, use the list commandcfg/vpn /sslclient/mobility Mobility configuration[Mobility Menu] roaming - Enable mobility per VPN or per group roamtime -Mobility Roamtime per VPN or per groupNortel VPN GatewayCommand ReferenceNN46120-103 01.01 Standard10 September 2007Copyright © 2007 Nortel Networks.
