Installing your MCC 3100 for Windows Mobile20 NN42030-107 MC 3100 3.0 Standard 02.02 November 2008• “Installing the software over the air” on page 22• “Upgrading the software over the air” on page 24Consult your system administrator for the preferred installation orupgrade method.Note 1: Disable sleep mode during the installation process.Note 2: Before beginning the installation process, ensure that yourdevice has at least 10 MB of free hard drive space. If not, you willhave to quit the installation to free up additional space. You can addmore space by deleting unnecessary files or reducing the size of theInternet Explorer cache.Note 3: If you are upgrading from an earlier release, you mustperform an initial software installation, not an upgrade. After theinstallation, update the Server IP/Host address on the LoginInformation screen if instructed to do so by your system administrator.Installing or upgrading from a computerWith this method, you add the software to your computer, connect yourcomputer to the mobile device with a USB cable, and then install thesoftware by using Microsoft ActiveSync.To verify that the data connection between MCC 3100 for WindowsMobile and Mobile Communication Gateway 3100 (MCG 3100) isestablished, see “Data connection between MCC 3100 for WindowsMobile and MCG 3100” on page 103.See Table 4 "Software files" on page 20 to choose the software foryour mobile device.Table 4: Software filesOS Form factor Software fileWM5 Pocket PC DesktopInstall-MCC3100-en-WindowsMobile5-Pocket-PC-single.zipWM5 Smartphone DesktopInstall-MCC3100-en-WindowsMobile5-Smartphone-single.zip
