Installing the Nortel Ethernet RoutingSwitchThis section describes the information and procedures used for installingthe Nortel Ethernet Routing Switch 5500 Series. Unless otherwise noted,tasks outlined in this section are applicable to all switches in this series.This following topics are covered in this section:• "Phone Dongle Part Number" (page 15)• "Electrostatic discharge" (page 16)• " Environmental requirements" (page 17)• " Package contents" (page 19)• " Installing the Nortel Ethernet Routing Switch 5500 Series on a tableor shelf" (page 20)• " Installing the Nortel Ethernet Routing Switch 5500 Series in anequipment rack" (page 21)• " Cabling requirements for the Nortel Ethernet Routing Switch 5500Series" (page 24)• " RJ-45 connector pin assignments" (page 27)• "Console port pin assignments" (page 29)• " Universal Serial Bus (USB) ports (5530-24TFD only)" (page 29)• " Power specifications for the Nortel Ethernet Routing Switch 5500Series" (page 30)• "Connecting AC power" (page 32)• "Checking LEDs on the Nortel Ethernet Routing Switch 5500 Series"(page 34)• "Setting IP parameters for the Nortel Ethernet Routing Switch 5500Series" (page 41)Nortel Ethernet Routing Switch 5500 SeriesInstallationNN47200-300 2.00 Standard5.0 7 July 2006Copyright © 2005 - 2006, Nortel Networks Nortel Networks Confidential.
