Nortel 8300 Series Installation And Commissioning Manual

Also see for 8300 Series: Installation Installation Installation Important notice User guide

Contents

10 Installing the chassisCheck Accessory Use ToConsole cable with built-in adapter Connect an optional managementconsole to the chassis. Each end ofthe cable has a DB9 connector.Read Me First for the EthernetRouting Switch 8310 and 8306Chassis (318192-C)Read the regulatory and safetyinformation for the Ethernet RoutingSwitch 8300.For additional information on installing the 8310 and 8306 chassis, seeInstalling and Maintaining the Ethernet Routing Switch 8306 and 8310Chassis (316795-C) or Nortel Ethernet Routing Switch 8300 Installation —Chassis Installation and Maintenance (NN46200-304).Removing a module or power supply filler panelNortel ships the 8300 series chassis with a filler panel covering each emptymodule slot. On an 8306 and 8310 chassis, the filler panel covers an emptymodule slot. Remove any filler panels prior to installing the chassis to makeit lighter to install.To remove a module or power supply filler panel:Step Action1 Using a Phillips screwdriver, loosen the 2 screws that fasten thefiller panel to the chassis.2 Pull the panel away from the slot."Removing a module or power supply filler panel for 8306 and 8310chassis" (page 10) shows the location of the filler cover for the 8306and 8310 chassis.Removing a module or power supply filler panel for 8306 and 8310chassis—End—Nortel Networks Ethernet Routing Switch 8300Installation and Commissioning — Quick StartNN46200-100 02.01 Standard3.0 6 September 2006Copyright © 2005-2006, Nortel Networks Nortel Networks Confidential.