Nortel 8300 Series Installation And Commissioning Manual

Also see for 8300 Series: Installation Installation Installation Important notice User guide

Contents

Verifying a successful installation 172 Wait 1 minute.3 Turn the power switch on each power supply to the on position.—End—Verifying a successful installationIn a normal power-up sequence, the LEDs light as follows:Step Action1 When power is applied to the Ethernet Routing Switch 8300, thegreen LED on each power supply and fan tray turns on, and theOnline LED for each module lights amber.2 Each module initiates a self-test, during which the port and moduleLEDs display various patterns to indicate the progress of the self-test.3 Upon successful completion of the self-test (within 2 or 3 minutesafter power is applied for a fully loaded chassis), the module OnlineLED transitions from amber to green.4 After one minute of operation, the fan tray Pass LED lights steadygreen.—End—If the LEDs on the modules light in this sequence, your installation issuccessful. Contact your network administrator to verify that the EthernetRouting Switch 8300 is now connected to the network.Nortel Networks Ethernet Routing Switch 8300Installation and Commissioning — Quick StartNN46200-100 02.01 Standard3.0 6 September 2006Copyright © 2005-2006, Nortel Networks Nortel Networks Confidential.