Configuring the system with the Setup Utility 21Prompt ActionPlease select CPU Master slot(5/6) [5]:Press Enter to accept the default (5), or specify 6 for the masterCPU slot.Master CPU mgmt port:autonegotiation [n] (y/n)?Enter n to accept the default, or enter y to indicate that youwant the master CPU management port to use autonegotiation.speed (10/100) [10]: Press Enter to accept the default (10 Mbps), or specify 100Mbps.Do you want to enable FTP [n](y/n)?Enter y if you want to enable FTP for remote users. Accept thedefault (n), if you do not want to enable FTP.Do you want to enable RLOGIN[n] (y/n)?Enter y if you want to enable Rlogin for remote users. Acceptthe default (n), if you do not want to enable Rlogin.Do you want to enable TELNET[n] (y/n)?Enter y if you want to enable Telnet. Accept the default (n), ifyou do not want to enable Telnet.Do you want to enable TFTP [n](y/n)?Enter y if you want to enable TFTP. Accept the default (n), ifyou do not want to enable TFTP.Do you want to enable WEBserver service [n] (y/n)?Enter y if you want to enable WEB server service. Accept thedefault (n), if you do not want to enable WEB server service.IP Address for mgmt port in firstCPU Slot [0.0.0.0/0.0.0.0]:Enter the IP address of the management port in the first CPUslot.IP Address for mgmtport in second CPU Slot[0.0.0.0/0.0.0.0]:Enter the IP address of the management port in the secondCPU slot.IP Address for mgmt-virtual-ip[0.0.0.0/0.0.0.0]:Enter the IP address of the virtual management port. Acceptthe default, 0.0.0.0/0.0.0.0, if you do not want to specify anIP address.First net mgmt route[0.0.0.0:0.0.0.0]:Enter the IP address of the first network management route.Second net mgmt route[0.0.0.0:0.0.0.0]:Enter the IP address of the second network management route(static route from the network management port to a device inthe network).Note: For security reasons, the system does not accept a routeto a network that conflicts with the main nonmanagement routingtable, and therefore does not accept a default route of 0.0.0.0.Third net mgmt route[0.0.0.0:0.0.0.0]:Enter the IP address of the third network management route(static route from the network management port to a device inthe network).Fourth net mgmt route[0.0.0.0:0.0.0.0]:Enter an IP address of the fourth network management route(static route from the network management port to a device inthe network).Nortel Networks Ethernet Routing Switch 8300Installation and Commissioning — Quick StartNN46200-100 02.01 Standard3.0 6 September 2006Copyright © 2005-2006, Nortel Networks Nortel Networks Confidential.