29Installing the BayStack Instant Internet Management Software Version 7.11Chapter 3Installing the Instant Internet softwareThis chapter describes how to install the Instant Internet management softwareand configure the Instant Internet unit.Before you beginBefore you install and configure Instant Internet, you should:• Read Chapter 1, “Introduction,” on page 19 to determine what additionalpreparation is necessary for installing the Instant Internet unit.• Install the Instant Internet hardware. Depending on your hardware, refer toone of the following manuals on the BayStack Instant Internet Software andDocumentation Version 7.11 CD shipped with your Instant Internet unit:— Setting Up the BayStack Instant Internet 100 Unit— Setting Up the BayStack Instant Internet 100-S Unit— Setting Up the BayStack Instant Internet 400 Unit— Setting Up the BayStack Instant Internet 400-S UnitBe sure to review the “Installation Checklist” and complete the “InstallationWorksheet” in Chapter 2 of the manual.• If necessary, make sure that your Ethernet device (for example, a router, acable modem, or xDSL modem) or 1-Meg modem is plugged in and has anactive connection to your ISP.Caution: Before you start the Instant Internet Install program, make surethat LED 2 on the front panel of the unit is glowing amber. DO NOTPROCEED if LED 2 is not glowing amber.
