66 Procedures for installation of the switch5. Country-specific AC power cord or DC adapter6. Power supply module and related documentation--End--Switch placementThe following sections describes the various methods of mounting orplacing a switch.Mounting on a table or shelfThis procedure describes how to mount 5000 Series switches on a table ora shelf.A single 5000 Series Switch can be installed on any flat surface. Thesurface should be able to support the combined weight of the switch andattached cables; between 15 and 20 lbs (7 to 9 kg) for a 5500 Seriesswitch, and between 21 and 33 lbs (9.5 to 15 kg) for a 5600 Series switch..CAUTIONDo not place a Nortel Ethernet Power Supply Unit 10 or NortelEthernet Redundant Power Supply 15 on top of a NortelEthernet Routing Switch 5500 Series. The switch housing ofa 5500 Series Nortel Ethernet Routing Switch is not strongenough to support the weight of these units.Procedure StepsStep Action1 Using Figure 9 "Attaching rubber footpads to a 5500 Seriesswitch" (page 67) as a guide, attach the provided rubberfootpads to the bottom of the switch in the locations shown.ERS 5000 Series InstallationNN47200-300 04.0313 April 2009Copyright © 2008–2009 Nortel Networks
