Chapter 1: Introduction to the EIU 39DMS-100 Family EIU User Guide TELECOM12Software for peripheral processors is controlled through package lists thatdefine the entities for a specific load. The EIU may have several loadsdepending upon the applications resident on it.As of CSP02, the EIU-related software is packaged in LANCOMM. Softwareis available with TL_ALL LCF. EIU-related software is provided as part oforder code TEL00001.EIU provisioning requirementsThe provisioning rules for the total numbers of EIUs depend on the followingrequirements:• the applications running on the EIUs• the total application capacity required for all EIUs on the switch• the level of redundancy required by these applicationsThe provisioning requirements are subject to the maximum limit of eight EIUsper switch.The following sections describe the provisioning limits for the newcomponents.DMS-bus inter-MS provisioningEach message switch in an IML requires an NT9X17DA port card and anNT9X20BB DS512 fiber paddle board.Card position is not restricted. However, the cards associated with a link mustuse the same slots in each MS. For example, if the cards in one MS areprovisioned in slot 21 (that is, the NT9X17DA is in 21F and the NT9X20BBNTXF19AA TCP/IP This package is the protocolsoftware from the transportlayer down to the link layer.NTXF19AA uses NTXF05AA.NTXS11AA FTP This package is the standardFTP client and serversoftware. NTXS11AA usesNTXF19AA.NTX70AA Telnet/RMAP This package is the standardtelnet server for remote MAP(RMAP) access.Table 1 DMS-Core feature packagesPackage Title Description(Sheet 2 of 2)
