80 Chapter 3: EIU datafill297-8991-910 Standard 03.01 August 1999Sample datafill for table IPROUTERFigure 17 shows sample datafill for table IPROUTER for an EIU.Figure 17 Datafill example for table IPROUTERTable IPHOSTTable IPHOST assigns the IP addresses to SuperNode end hosts. SuperNodeend hosts can have one or two addresses, depending on the entry in fieldNODENAME.Table IPHOST activates the TCP layer and its applications on those nodes.Note: If the TCPCONN field in table IPHOST is set to 0, communicationin related applications stops.Table IPHOST also supports application processor (AP) and file processor(FP) datafill for both Support Operating System (SOS) nodes and for SOSSuperNode UNIX (SNIX) nodes for which two IP addresses are needed.ETHARP YES or NOEthernet address resolution protocolEnter YES if the EIU is to engage inaddress resolution protocol (ARP)activity within the Ethernet subnet.Otherwise, enter NO.The default value for this field is YES.ETHPARP YES or NOEthernet proxy address resolutionprotocolEnter YES if EIU is to engage in proxyARP activity on behalf of theSuperNode hosts within the Ethernet.Otherwise, enter NO.The default value for this field is YES.Table 13 Field descriptions for table IPROUTER for EIU datafill (continued)Field Subfield orrefinementEntry Explanation and action(Sheet 2 of 2)RKEY ROUTER SNIPADR ETHIPADR ETHARP ETHPARP-----------------------------------------------------------------------0 EIU 117 47 209 192 117 47 59 132 241 YES YES
