Nortel HMS400 Maintenance Manual

Also see for HMS400: Quick reference card Installation and configuration guide

Contents

Nortel HMS400 Maintenance Manual Manual pdf 142 page image

April 2006Secondary IDE Slave NoneProcessor Settings • Processor POST speed setting: 2 GHz(shown in grey)• Processor Hyperthreading: Enabled• Processor 1 CPU ID: F24 (shown in grey)• Processor 1 CPU Cache size: 512k ECC(shown in grey)• Processor 2 CPU ID: Not installed (shownin grey)• Processor 2 CPU L2 Cache size: (shown ingrey)English (US)LanguageAdvancedOptions SettingsPCI Configuration Use default values.Note: Default values are generated bypressing F9 before you change CMOSvalues.• USB: Enabled• NIC1: Enabled• NIC2: Enabled• Video: Enabled• SCSI: Enabled• Option ROM: Enabled (where applicable)• PCI slots ROM: EnabledIntegrated PeripheralConfiguration• COM1: IRQ4• COM2: 2f8/IRQ3• Parallel Port: ECP/378/IRQ7/DMA Channel3• Floppy disk controller: Enabled• Legacy USB support: Auto• Front Panel USB: DisabledMemory Configuration • Bank 1: Installed• Bank 2: Not installed (shown in grey)• Memory Retest: DisabledAdvanced Chipset Control • Wake on LAN: Disabled• Wake on PME: Disabled• Wake on RTC alarm: DisabledEnabledBoot Time Diag ScreenReset Config Data NoNum Lock OnSleep Button DisabledNortel Hospitality Messaging Server 400 -142-Maintenance Guide