32 While on an active call2 Use the dialpad to enter the number to which to transfer the call.3 When that number rings or is answered, press the transfer key again.The call is transferred.—End—Using conference callFollow this procedure to engage in a conference call.The Three Way Call (3WC) feature allows you to add three calls to aconference. If six port conference is available, you can add a maximum ofsix calls to a conference. If six port conference is available, 6WC appearsbeside a feature key in the display.Step Action1 During a call, press the key to which the conference call feature isassigned, either 3WC or 6WC.The call is put on hold and a dial tone sounds. On the display, anindicator flashes beside the line on which the call is held.2 Dial the number of the person you want to add to the call.At this time, you can talk privately to the person you are adding, toannounce the conference.3 Press the conference key again to merge the calls.4 Repeat steps 2 and 3, to add more calls to the conference.5 If you make a mistake dialing, or a party does not want to be includedin the conference, press the softkey with the DN assigned, select theDN from the Call Services list, or press the line key.—End—Carrier VoIPNortel IP Phone 1110 User Guide (CICM)NN10300-021 1.0 Draft(I)SN10 30 November 2006Copyright © 2006 , Nortel Networks Nortel Networks Confidential.
