25While on an active callWhile on an active callThis section describes features that you can use while on an active call.Place a call on HoldUse the Hold feature when you are on the line with one party and a second callcomes in on a second line. You can answer the second call and retain the originalcall by putting it on Hold.To place a call on Hold:/ Press the Hold Key. The LCD indicatorflashes beside the line on hold.Note 1: If the Automatic Hold feature isconfigured for your Meridian 1, the activecall is automatically put on Hold when youanswer the second call.Note 2: On the Meridian SL-100Automatic Hold is the default feature.Note 3: The caller hears music while onhold, if the Music on Hold feature isconfigured for your system.To retrieve a call on hold:Press the Line (DN) Key beside theflashing LCD indicator.Transfer a callThe Transfer feature is used to redirect a call to the appropriate person.To use the Transfer feature to direct acall to a third party.or1. On the M3903 and M3904, press theTransfer Soft Key. The other party is onhold and you receive dial tone. TheLCD indicator light flashes steadily.or/ On the M3902, press the fixedTransfer KeyHold2498TransTransfer
