28While on an active call/ 2. Press the Goodbye Key. The callerremains connected to the attendant.Note: On the Meridian SL-100, theAttendant Recall Key is not available; usethe Transfer Key to connect a call to theattendant.Use Call ParkCall Park allows a call to be held temporarily and retrieved from any telephone.You can park an incoming call and page the called party. When you use Call Parkyou do not tie up a line. Your network administrator can set up a System Park DNwhere most calls are automatically parked.If configured network wide, Call Park can be used across networks.To Park a call on the System Park DNor your own DN:While on an active call,press the Park Key.If there is a System Park DN, the callautomatically parks on the SystemPark DN. Otherwise, it parks on yourDN.Note: On the Meridian SL-100, press thePark Key and you receive a confirmationtone. Press the Park again or theGoodbye Key.To park a call on a DN other than theSystem Park DN or your own DN:1. Press the Park Key.2. Dial the DN where you want to parkthe call.3. Press the Park Key.Note: On Meridian SL-100, press DirectedCall Park (DCPK) Key. Dial the DN whereyou want to park the call. Press DCPKagain.GoodbyeParkParkPark
