Nortel Meridian 1 Manual
Also see for Meridian Meridian 1: Installation guideImplementation guideScripting GuideConfiguration manualDescription
                                                                                        | |
Contents
|
Operation procedures and tests Page 21 of 86Meridian data features Operations and testsProcedure 5Automatic dialingStep Action Verification CommentProgramming Auto DialStart Condition. POWER lamp on. Data station idle.Handset on-hook.1 Press DATASHIFT key.DATA SHIFT lamp on. Data station shifts to data mode.Further SL-1 set key depressionscorrespond to DDN.2 Press AUTODIAL key once.AUTO DIAL lamp flashes.3 Dial the datanumber to beprogrammed (upto 23 digits).SeeX11 Features and Services(553-3001-306) for digitmaximums per generic.4 Press AUTODIAL key again.AUTO DIAL lamp off. Number stored.5 Press RLS orDATA SHIFT key.DATA SHIFT lamp off. Data station shifts back to voicemode.Using Auto Dial6 Press DDN key. DDN and DATA SHIFT lampson.DIAL tone on speaker.Data station shifts to data mode.7 Press AUTODIAL key.DIAL tone off.RINGBACK tone on speaker.After digits are outpulsed,Ringback or busy tone is heard.8 Called DDNanswers.DATA SHIFT lamp off.CONNECT lamp on.RINGBACK tone off.CONNECT BEEP onspeaker.Data call established. Setswitched to voice mode.9 Press DATASHIFT key.DATA SHIFT lamp on. Data station shifts to data mode.10 Press RLS key. DDN, DATA SHIFT, andCONNECT lamps off.Data station shifts to voice mode.Data station idle. |
Related manuals for Nortel Meridian Meridian 1
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine