Nortel Meridian Companion Installation And Maintenance Manual

Also see for Meridian Companion: Operation guide Supplementary guide Product support bulletin Reference guide Reference manual

Contents

Nortel Meridian Companion Installation And Maintenance Manual Manual pdf 164 page image

Page 154 of 206 Maintenance553-3601-220 Standard 4.00 November 199816. Using the instructions described in “Card Status” on page 128, verifythat all cards are present and appear in the Idle state.17. Using the instructions described in “TCM Status” on page 132, verifythat all Base Stations are located in the appropriate slots and that theAdministration Terminal is in the first CMCC port.18. Set the proper system date and time as described in “Programming thesystem time and date” on page 90.19. Verify proper operation by placing a call to at least one portabletelephone on each card.Replacing a defective expansion card“Troubleshooting cards” on page 165 lists the signs that indicate the need fora card replacement. Card replacement should be performed when the card isidle.If the defective expansion card is on the far right of the Meridian Companionset of cards, it can simply be removed and replaced with a new card. If the cardis in the middle of the card set, replace it by following these steps:1. Disable the card from the Meridian 1 system and the MeridianCompanion system.2. Open the door of the IPE or CE/PE Module or expansion cabinet.STATIC!Wear a grounding strap.Do not touch the printed circuit board or theconnector. The printed circuit board is a static-sensitive device.WARNING!Each maintenance cable has a left plug anda right plug. Switching the plugs will disablethe Meridian Companion system.