IP Softphone 2050 Settings89Reset buttonWhen you select the Reset button in the following procedures, the phoneresets immediately without any warning.However, if you make a change to the settings and select Apply or OK,the phone indicates that a reset needs to take place. A warning messageappears—"IP softphone 2050 must reset for the configuration changes tobe complete. Select Yes to reset now or select No if you plan on resettinglater". You can select Yes to reset now, or No, to defer it until later.Selecting MAC addressesTo select a MAC address:1. Click Auto-Create. The Hardware ID text box displays the nextaddress in a range of addresses.2. Continue clicking Auto-Create to move through the range ofavailable addresses, until you find the one you need.After you click through all available MAC addresses, Auto-Creategenerates random hardware ID numbers. Select one of these numbers ifyour Ethernet hardware address is not unique to the server.To return the settings to their installation defaults, click Restore Defaults.To reset the Hardware ID while the IP Softphone 2050 is running, clickReset.Note: The Firmware Version field displays the latestIP Softphone 2050 firmware version reported by the server.
