Printing system license limits 43Configuring ISM requirementsISM counts are created for each of the Universal Extension subtypes,according to the following table.Universal Extension UXTY ISM DescriptionMOBX Mobile Extensions Implemented by this featureTLSV Telephony Services Microsoft OCS 2007 supportFMCL Converged Mobile Users MC 3100 clientsSIPN Nortel SIP Lines Support for SIP phones madeby or for NortelSIP3 Third Party SIP Lines Support for SIP phones notmade for NortelEach mobile user consumes a license out of the total FMCL ISM count.The FMCL ISM count will be decremented and incremented when a UEXTis configured as an FMCL unit (when UXTY prompt is configured asFMCL).Verify that sufficient ISMs are licensed for your system, using LD 22 (REQSLT).Printing system license limitsWhen REQ is configured to SLT in LD 22, system License limits areprinted. You can update the value of License limits either through sysloador the Instant Software License feature. You can print the new Licenselimits through LD 22 after the update is complete.In the License limits printout, three parameters are printed for eachLicense• The first parameter is the License limit• The USED parameter is the number of configured units.• The LEFT parameter is the difference between the License limit andthe USED value (LEFT = License limit - USED).Procedure stepsStep Action1 Connect to your call server.2 Press enter.3 Enter the following command to log in to the system:LOGI admin24 Enter the Level 2 password.Nortel Mobile Communication 3100Mobile Communication 3100 and Communication Server 1000 Solution Integration GuideNN49000-315 02.01 2 October 2009Copyright © 2008-2009 Nortel Networks. All Rights Reserved..