Adding a User Endpoint 49The Commit command is issued, and the database is placed intoa Committed state.--End--Adding a User EndpointUse this procedure to add a user endpoint to the NRS.Each mobile client instance is represented by a User Endpoint (UE).Create the UE in the L0 domain that corresponds to the PBX that hosts theuser. A typical UE attribute configuration is as follows:• User name: user’s Electronic Switched Network (ESN) number (forexample, 3435335)• Tandem gateway endpoint name: (do not configure) none• L0 directory number (DN): a number based on the user’s DN that cannever match in the Coordinated Dialing Plan (CDP) or Universal DialingPlan (UDP). This can be the last digit of the mobile prefix + User’s ESNDN (for example, 53435335).• L1 directory number (DN) prefix: (not required) none• Authentication enabled: Authentication on• Authentication password: xxxxxxxThe MCG 3100 registers as a gateway endpoint. As each client logs on,the MCG 3100 uses the user account on the CS 1000 to validate thepassword of the user. Call routing does not use SIP registration.Procedure stepsStep Action1 In the NRS Manager Navigator, select Numbering Plans,Endpoints. The Endpoints Web page opens.2 Ensure that the Standby database is selected.3 The Limit results to Domain menu contains configured ServiceDomains, L1 Domains and L0 Domains. Select a ServiceDomain, a L1 Domain and a L0 Domain from the respectivedrop-down lists.4 Click the User Endpoints button. The Endpoints Web pagedisplays a list of configured User Endpoints in the Endpointspane.5 Click the Add button. The Add User Endpoint Web page opens.6 Configure the User Endpoint, using the Job Aid.7 Click the Save button.Nortel Mobile Communication 3100Mobile Communication 3100 and Communication Server 1000 Solution Integration GuideNN49000-315 02.01 2 October 2009Copyright © 2008-2009 Nortel Networks. All Rights Reserved..