Installing the DFC on systems equipped with a BIC 19P0886634 Issue 1.0 FAX Installation GuideFigure 13 Disconnecting the Serial Ports A and B and the keyboard/mouse connector6. Locate the BIC and disconnect the fiber cable.The BIC is located in Slot 2 ofthe NAM II and in Slot 4 of the new NAM.7. Remove the slot cover screw.8. Use both hands to carefully hold the BIC along the top. Lift the BIC straightup and out from the module. Sometimes the BIC is tightly seated and difficultto remove. You may need to wiggle it out with a slight rocking motion.Installing the Media Services Bus Expansion Card (BEC) on the BICA Media Services Bus Expansion Card (BEC) Type A is a daughterboard that isinstalled on the BIC provides the BIC with the ability to connect to a Digital FaxCard (DFC).Before you begin the installation, you must have #2 Phillips screwdriver.To install the BEC:1. Ground yourself by attaching one end of the grounding strap to your wrist andthe other end to a grounded metal surface.Serial Port A ConnectorSerial Port B ConnectorKeyboard/mouseConnectorKeyboard/mousebackplane connector