126 Chapter 6 Using Multicast Manager208963-BToolbarThe toolbar includes the same buttons as Optivity Switch Manager and the othersubmanagers. For information about the toolbar buttons available in MulticastManager, refer to Table 5 on page 36.Navigation paneThe Multicast Manager navigation pane (Figure 55) is on the left side of thewindow. It contains the protocol and group folders in the navigation tree. The firstfour branches of the navigation tree list the multicast protocols supported by thedevices. The last branch lists the root of all active multicast groups, with the firstlevel identifying the source subnets and the second level identifying theintermediate forwarding nodes.In the navigation pane, you can select the folder for which you want to viewmulticast information, or use the Print command to print the navigation tree.View HighlightTopologyHighlights the devices running themulticast protocol within the topologymap in the Optivity Switch Managercontents pane, and highlights themulticast forwarding path from thesource subnet.To view source subnets or forwardingdevices, you must select the IP addressassociated with the subnet or device.Audit Queries the network topology to reportany discrepancies.Help OnlineSupportOpens a Web browser and loads theNortel Networks Customer Support Webpage.AboutMulticastManagerDisplays information about MulticastManager.Table 37 Multicast Manager menus and commands (continued)Menu Command Shortcut key Purpose
