166 Chapter 7 Using Log Manager208963-BUploading Passport syslog files to your managementstationThis section describes how to upload Passport 8000 Series (version 3.0 andhigher) syslog files to your management station. The procedure here illustrates thegeneral principles of the upload process for all switches. For specific details ofusing Device Manager or the CLI on other switches, refer to the Device Managerand CLI reference guides for those switches.You can upload Passport 8000 Series syslog files to your management stationusing the FileSystem dialog box in Device Manager or using the command lineinterface (CLI). For more information about using Device manager or the CLI,refer to the reference guides for Device Manager and the CLI listed in “Relatedpublications” on page 18.Uploading a file using Device ManagerTo upload a Passport 8000 Series syslog file using Device Manager:1 From the Device Manager menu bar, choose Edit > File System.The FileSystem dialog box opens with the Copy File tab displayed(Figure 80).Note: To upload syslog files, you must have a TFTP server installed onthe management station.Note: The Passport 1000 Series does not support this feature.
