Nortel Telephony Manager User Manual

Also see for Telephony Manager: Supplementary guide Installation and configuration Installation manual

Nortel Telephony Manager User Manual Manual pdf 18 page image

Using Desktop Services18ExamplesThis section provides examples of several types of telephone datachanges.Assigning an Auto Dial keyTo assign the Auto Dial (ADL) function to a key on your telephone:1. Choose a key that has no assigned function on your telephone.2. Scroll down the list of keys in the Keys section of the TelephoneDetails page until the selected key number is visible.A key type of NUL - Unassigned is displayed in the Key Typecolumn.3. Select ADL from the drop-down list in the Key Type column.The Telephone Details page refreshes. Two parameters, Numberof Autodial Digits and Autodial DN, are displayed in the Key Valuecolumn. An edit box is provided for each parameter.4. Determine the maximum number of digits of your ADL DN.5. Enter the maximum number of digits of your ADL DN in the Numberof Autodial Digits edit box. See Figure 2.6. To program the DN by using the web display, enter the ADL DN in theAutodial DN edit box.Note 1: You can also program the DN by using the ADL key after thekey is configured on your telephone.Note 2: If you enter a value in the Number of Autodial Digits editbox that is greater than the system maximum, or if you enter anAutodial DN that has more digits than the system maximum, youreceive a validation error.