Nortel i2021 Series User Manual

Nortel i2021 Series User Manual Manual pdf 66 page image

i2021 ISDN Teleset60The i2021 Teleset contains feature keys up to key 96. Feature keys abovekey 16 are automatically assigned to softkeys. However, all keys may bemapped to hardkeys if desired. For further information, refer to theparagraph that explains “key mapping.”To Use the Inspect feature, press the Inspect Feature key.You can then either press one of the hardkeys (1-16), or enter a numberon the dial keypad. For example, suppose you wish to inspect key 2. Firstpress the Inspect key, then press key 2. The switch then displays the CallAppearance, or feature, assigned to key 2. Perhaps you wonder what isassigned to key 60? To find out we must remember that keys over 16 areautomatically assigned to a softkey. Since key 60 is a softkey, you mustenter 60 followed by a # sign, on the keypad. The switch then displays theCall Appearance or feature assigned to key 60.INSPECT OR VIEW?The i2021 Teleset has a “local inspect” feature built into the Teleset. Thelocal inspect feature is called “View Key”. Refer to the paragraph thatexplains View for additional information. What is the difference betweenInspect and View? View shows the user the Teleset information about aspecific key. Inspect displays what the switch has actually assigned tothat key.ViewView is a feature that is local to the phone. It will only reflect the currentprogramming of the phone. To ensure accuracy, perform a Parameterdownload before using View Key.Key assignments should be checked if features/options do not seem towork correctly. Often the Teleset is blamed for incorrect or missing keyNOTE: Inspect is a timed feature in the switch. After pressingthe Inspect key, you are given about ten seconds toenter the key number that you wish to inspect.