Notifier AFP-300 Operation Manual

Also see for AFP-300: Installation manual Manual Programming manual Product installation guide Programming manual

4. Read Status Read Status Options16 AFP-300/AFP-400 Operations PN 50260:C1 05/22/97Read Status for Pointsand ZonesRead Point options let you display point and zone status on the display, but theinformation is not sent to the serial ports or the history file. To read the status of pointsand zones, press <0> then from the Read Status screen. The control paneldisplays the Read Point screen (Figure 11):Figure 11 Read Point Screen• To read a detector, press H then enter the detector address.• To read a module, press I then enter the module address.• To read an output circuit, press J then enter the output circuit address.Read Status for aDetector, Module, orOutputFrom the Read Status screen, press 0; then press . You can then read thestatus of a detector, module, or output. For example, to read the status of a detector atD101, press H, enter the address (D101), then press . The control paneldisplays information about the detector as shown in Figure 12:Figure 12 Detector Read Status Sample ScreenZONE=Z,AA,E DETECTORS=*,AAA,EMODULE=#,AAA,E OUTPUT CKT=&,A-A,ENORMAL SMOKE (PHOTO) DETECTOR ADDR 101Z03 Z Z Z Z 000%AL:5 PA:0 *V D101Multidetector selectionType CodeAlarm Verification selectionCustom Label for the detectorDefault ZoneSelection Alarm Sensitivity LevelPre-Alarm Sensitivity LevelAddress (01-99)D (Detector) or M (Moduleor OutputSLC loop numberTechnical Manuals Online! - http://www.tech-man.com