Notifier AFP-3030 Installation Manual

Also see for AFP-3030: Programming manual Operation manual Installation manual Operation manual

Contents

Notifier AFP-3030 Installation Manual Manual pdf 8 page image

8 AFP-3030 Installation Manual — P/N DOC-01-031:F 19/11/2018System Overview Specifications2.2 Specifications2.2.1 Supply Rating2.2.2 Environmental Specifications2.3 System ComponentsCentral Processing Unit (CPU) with Power Supply The central processing unit for the AFP-3030 is a combination of the CPU and onboard power supply (NPS-5CHS or NPS-11CHS). The power supply provides +24 V DC power and a battery charger for the basic sys-tem. Auxiliary power supplies and/or battery chargers are available to customize large systems.Keypad/Display The keypad with built in LCD display serves as a primary display for the AFP-3030.Enclosures Five cabinet sizes are available; CAB650, CAB900, 18U, 28U, and 40U. Refer to Section 2.5, “System Cabinets”, on page10 for additional information.SLC Loops: LCM-320, LEM-320 To provide one SLC loop, connect one LCM-320 to the panel. Connect an LEM-320 to the LCM-320to provide a second loop. Up to five pairs of modules can be installed on the panel to provide a maximum of ten SLC loops.Network Connection Connect a wire or fibre version of the NCM or the HS-NCM to provide a connection to the Noti•Fire•Net (net-work version 5.0 or higher) or High-Speed Noti•Fire•Net.Annunciators The AFP-3030 supports ACM-24AT/ACM-48A (and their expanders) with either 64 or 96 points at an address, as well asLDM-32 (and expanders) and Notifier’s other ACS devices. (See Section 2.6 “Compatible Equipment” if looking for specific ACSdevices.)Audio System Voice evacuation applications are documented in the Audio System manuals: DVC Digital Voice Command Manual,DAA2 and DAX Amplifiers Manual, DS-DB Digital Series Board Manual, DVC-RPU Manual and the AA-series Audio Amplifiers Man-ual.Mass Notification System The AFP-3030 supports Mass Notification applications. Installation, programming and operation informa-tion for Mass Notification systems are documented in the Mass Notification Manual. Refer to the AFP-3030 programming and operationmanuals for additional information.2.3.1 Replacement KitsThe system components that are available as replacement kits for the AFP-3030 are listed in Table 2.1.Supply Rating Parameter DetailsInput Fuse Rating M205 Fuse - 250V, 8.0AInput Voltage Rating NPS-5CHS: 100-240 V AC, 50-60 Hz, 0.8-2.5 ANPS-11CHS: 100-240 V AC, 50-60 Hz, 1.5-5.0 AOutput Ratings DetailsOutput Current NPS-5CHS: 5.6 A @ 27.3 V DCNPS-11CHS: 11.7 A @ 27.3 V DCOutput Ratings (Charger) DetailsCharger Voltage 27.3 V DCEnvironmental SpecificationsParameters DetailsEnvironmental Limits 0°C to 49°C dry heat40°C @ 93% relative humidityIP Rating CAB650, CAB900: IP3018U, 28U, 40U: IP52NOTE: Annunciators for the AFP-1010, AM-2020, and AFP-2800 operate on a different baud rate and are not compatiblewith the AFP-3030.NOTE: The AFP-3030 does not support Control Active LED.Model Number DescriptionASY-02-034 NPS-5CHS 5.6 A Power Supply Replacement KitASY-02-033 NPS-11CHS 11.7 A Power Supply Replacement KitASY-02-056 CPU2-3030AU CPU Replacement Kit for Australian AFP-3030FG-50-011 DISP-3030AU Keypad Replacement Kit for Australian AFP-3030ASY-01-035 Battery connection packFG-65-012 3 V BR2335 23mm Lithium BatteryTable 2.1 Available Kits