Notifier NFS-3030/E Operation Manual

Also see for NFS-3030/E: Installation manual Programming manual

Contents

Notifier NFS-3030/E Operation Manual Manual pdf 11 page image

Message Formats General InformationNFS-3030 Operating P/N 51344:C 11/4/03 11RECALL LAST ENTRY -For future use. No function at this time.INCREMENT NUMBER - For future use. No function at this time.LED IndicatorsThere are ten labeled LEDs aligned along the left edge of the keypad. They light to annunciatecertain conditions, as described in Table 1.1 below.Table 1.1 LED Indicators1.5 Message FormatsThis section describes the formats for system normal, device events and system events screens. Fora definition of these types of events, as well as instructions for dealing with them, refer to Section2, "Operation of the Control Panel" in this manual.1.5.1 System Normal ScreenThe System Normal message appears at the top of the display when no off-normal events exist. Itconsists of two lines, each 40 characters long. Line one is a custom network message. Line 2 is astandard message giving the System Normal message, the time, day of the week, and date. TheMain Menu is selectable using the lower right soft key.Line 5 indicates the current time and date.LED INDICATOR COLOR FUNCTIONPower Green Illuminates when AC power is within normal operating limits.Fire Alarm Red Illuminates when at least one fire alarm event exists. It will flash ifany of these events are unacknowledged.Pre-alarm Red Illuminates when at least one pre-alarm event exists. It will flash ifany of these events are unacknowledged.Security Blue Illuminates when at least one security event exists. It will flash if anyof these events are unacknowledged.Supervisory Yellow Illuminates when at least one supervisory event exists. It will flash ifany of these events are unacknowledged.System Trouble Yellow Illuminates when at least one trouble event exists. It will flash if anyof these events are unacknowledged.Other Event Yellow Illuminates for any category of event not listed above. It will flash ifany of these events are unacknowledgedSignals Silenced Yellow Illuminates if the NFS-3030 Notification Appliances have beensilenced. It flashes if some but not all of the NFS-3030 NACs havebeen silenced.Point Disabled Yellow Illuminates when at least one device has been disabled. It will flashuntil all disabled points have been acknowledged.CPU Failure Yellow Illuminates if there is an abnormal hardware or software condition.Contact technical support. The panel is out of service when this LEDis illuminated or flashing.Technical Manuals Online! - http://www.tech-man.com