Novexx Solutions ALS 20 series User Manual

Contents

Novexx Solutions ALS 20 series User Manual Manual pdf 39 page image

User Manual ALS 20x/256/27207/2017 | 00 39 Product descriptionNotesFunction descriptionsThe following chapters only describe those functions that are necessary for operating anALS 2xx/272 that has been configured and set up. These functions are highlighted in grey in theoverview.Settings of functions that are not described in the following may only be changed by quali-fied service technicians. These functions are described in the service manual.The settings range or the individual settings for a function are shown in square brackets.– The default value is italicised for functions that have individual settings.– Settings that consist of several words are shown in quotation marks.Quick settingLABEL SETUP menuLoad prod.profil function– Loads product profiles from the internal database.– Product profiles contain product-specific settings.– You can select a maximum of 16 product profiles.– You can only select product profile numbers that have profiles already stored for them.– See Loading a product profile  on page 62.Gap detect. mode function– After one of the following events, the labeler must always search for the punch, that is initializethe label material: after switching the device on; after changing the label material.– Settings: [Manual, „Autom. forward“]Manual: The operator has to initialize the material always manually by pressing the feed keyseveral times.Autom. forward: The material initialization is always done automatically, if necessary.Dispense speed function– The speed at which the label is dispensed– Setting range:ALS 204: [1.0…40.0] m/min; default: 10.0ALS 206: [1.0…30.0] m/min; default: 10.0ALS 256: [1.0…50.0] m/min; default: 10.0ALS 209: [1.0…25.0] m/min; default: 10.0ALS 272: [1.0…70.0] m/min; default: 10.0– See “Dispensing speed” auf Seite 57.Buttons Effect+ Decrease value with 10fold speed.+ Increase value with 10fold speed.+ Reset value to lowest setting.[Tab. 32] Button combinations for quick setting of functions with a huge value range.