Novexx Solutions ALS 20 series User Manual

Contents

Novexx Solutions ALS 20 series User Manual Manual pdf 55 page image

User Manual ALS 20x/256/27207/2017 | 01 55Starting label dispensingDispensing with a product sensorOnce switched on, the ALS 2xx/272 is in dispensing mode; this means that triggering the productsensor will cause a label to be dispensed.Prerequisites:– The label length must be specified.– The product sensor must be connected.– The sensors must be configured correctly (PNP/NPN).Dispensing without a product sensorIt is also possible to trigger the dispensing process without a product sensor:– The machine is in dispensing mode: Press the button.– The machine is in configuration mode: Press the button briefly (less than two seconds).Stopping/Continuing the dispensing process– The machine is in dispensing mode.Stopping the dispensing: Press the button.– The dispenser stops.– Displayed text (Second line = scroll text.):Continuing the dispensing: Press the button.ONLINEStopped . press ^ key to start