Nuna Bugaboo turtle Manual

Also see for Bugaboo turtle: Instructions for use Instruction manual Instructions for installation

vehicle seat from being torn. They can also guide theISOFIX connectors.3 Rotate the ISOFIX connectors 180 degrees until theyare pointing in the direction of the ISOFIX guides. (9)4 Line up the ISOFIX connectors with the ISOFIX guides,and then click both ISOFIX connectors into the ISOFIXanchor points. (10)Make sure that both ISOFIX connectors are securelyattached to their ISOFIX anchor points. There shouldbe two audible clicks and the colors of the indicatorson the both ISOFIX connectors should be completelygreen.(10) -1Check to make sure the base is securely installed bypulling on the both ISOFIX connectors.5 After placing the base on the vehicle seat, extend theload leg to floor (11). When the load leg indicator showsgreen means it is installed correctly, red means it isinstalled incorrectly. (11)The load leg has 24 positions. When the load legindicator shows red this means the load leg is in thewrong position.Make sure the load leg is secure by pressing down onthe front of the base.To shorten the load leg, squeeze the load leg releasebutton and pull the load leg upwards. (11)-1The completely assembled base is shown as (12)The ISOFIX connectors must be attached and lockedonto the ISOFIX anchor points. (12)-1The load leg must be installed correctly with greenindicator. (12)-26 To remove the base, press the secondary lock button(13)-1 first and then the button (13)-2 on the latch15EN