Nuvico EasyNet ED-P400 Installation Manual

Contents

18OVERVIEW1. POWER: This button turns the DVR On and Off.2. ACK: This button is used to manually turn off alarm relay and buzzer.3. ID: This is button is used to set the ID of the remote controller.If ID of the infrared remote control is set to 0, the infrared remote control will control all DVR. If the DVR ID is 1 to99, you must to press the ID button on the remote control and then press the number button (1 to 10) and pressthe ID button in order to control that DVR.How to Set Remote Control IDExample: How to program ID 1 (Factory Default) into the remote control. It is a 3 step process.• Press ID button, then, press 1 button, then finally, press ID button again to save.4. Numeric Buttons: 1~16 or 17~36 when SHIFT pressed.5. PANIC: This button is used to manually turn on/off the Panic recording mode.6. SHIFT: Press SHIFT to select the number button from 17 to 36.7. SEARCH: This button accesses the search menu.8. D.ZOOM: This button is used to manually turn on/off the digital zoom mode.9. REC: Press this button to start recording.10. ESC: The ESC button is to exit from the main or each menu of the DVR.11. DIRECTIONAL ARROW BUTTONSArrow buttons are used to navigate through menus and GUI. They are also used to control Pan and Tilt in thePTZ mode, and to move the specific area of screen in the digital zoom mode. Lastly, during playback mode, theyare used to fast forward/fast reverse/pause the images. In the live mode, pressing the RIGHT button starts fromthe latest recording on the hard drive. In the live mode, pressing the RIGHT button starts from the latestrecording on the hard drive.12. STOP: During live mode, press this button to stop recording. During playback mode, press this button to return to livemode.13. ENTER: The ENTER button is used on the menu and select the cameo of the screen.14. MENU: The menu button is to access the main menu of the DVR.15. PTZ: Press this button to activate/deactivate PTZ mode.16. DISPLAY: This button is used to switch between multiple display modes.17. SEQ: This button is used to activate camera sequencing.18. AUDIO: This button is used to call the audio pop-up menu.