OHAUS Adventurer SL AS64 Instruction Manual

OHAUS Adventurer SL AS64 Instruction Manual Manual pdf 16 page image

EN-12 Adventurer SL3.3 Application ModesThe Adventurer SL balance includes Weigh, Count, and Percent application modes.To use these application modes, they must be turned on (SET ON) in the Mode Sub-menu. The default mode, Weigh, has been SET ON at the factory. The other modesare SET OFF.3.2 Button Control FunctionsThe balance is operated using two multi-function buttons located on the front of thebalance. Button labels indicate the functions of each button. Operation of the buttonsis described in these instructions according to the function being performed.3.3.1 Weigh ModeUse the Weigh Mode to determine weight using a selected unit of measure. Severalunits of measure are available, including grams. The balance will weigh only ingrams until other units of measure are SET ON in the Unit Sub-menu (See Section3.5.4).ButtonPrimaryFunction(Press)SecondaryFunction(Press & Hold)MenuFunctionOn/Zero• Turns balance On.• If balance is On, sets Zero.Off• If balance is Off,enters Menu.• If balance is On,turns balance Off.Yes• Enter the Menu or Sub-menu option displayed.• Accepts the current settingon the display.Mode/Unit• Cycles through the loop ofenabled modes and units.No• Cycles through Menu,Sub-menu, or Settingoptions.• Press and hold to exitMenu or Sub-menu, orabort Calibration.Mode/Unit• Changes to the nextenabled mode or unit.