OHAUS Adventurer SL AS64 Instruction Manual

OHAUS Adventurer SL AS64 Instruction Manual Manual pdf 24 page image

EN-20 Adventurer SL3.5.2 Setup Menu (Cont.)Global ResetThe Global Reset Menu Item is used to reset allbalance settings to their factory default values.When GBL RST is displayed, press Yes to enterthis Menu Item.When RESET is displayed, press Yes to resetthe balance, or press No to abort and go to theEND SETUP Menu Item.End Setup MenuWhen END SET is displayed, press Yes to exitthe Setup Sub-menu and move to the ModeSub-menu, or press No to return to the firstMenu Item in the Setup Sub-menu.3.5.3 Mode Sub-MenuThe Mode Sub-menu is used to enable threeapplication modes, Weigh, Count and Percent.From Menu, Press No to go to MODE. WhenMODE displays,WeighThe Weigh Mode is SET ON or SET OFF.From the Mode Sub-menu, press Yes whenWEIGH is displayed, or press No to displaythe other modes. When Weigh is selected,the Weigh setting is flashed. Press No to goto the other setting or Yes to accept the settingand return to the Mode Sub-menu.CountThe Count Mode is used to count the number ofitems (pieces) on the weighing pan. The CountMode is SET On or SET OFF.Press No on the Mode Sub-menu until Countdisplays. Press Yes and the display flashes thecurrent setting. Press No to display the othersetting. When the desired setting flashes, pressYes to accept this setting. The default setting isSET OFF.press Yes to enter the Mode Sub-menu.The default for Weigh is SET ON.