OHAUS EB3 Instruction Manual

Also see for EB15: Service manual Service manual Instruction manual

Contents

OHAUS EB3 Instruction Manual Manual pdf 9 page image

EB SERIES EN-32. INSTALLATION2.1 UnpackingUnpack and verify that the following components have been included:• Scale Unit• Weighing Platform (plastic base with stainless steel pan)• Instruction Manual• AC AdapterSave the packaging material. This packaging ensures the ideal protection for thestorage or transport of the product.2.2 Installing ComponentsPosition the weighing platform pins into the through-holes on the top housing, thenset the platform securely into place. Secure the in-use cover with double-sided tapeas needed.IMPORTANT:• Before using the scale, remove the shipping protection screw locatedunderneath the scale. This screw ensures protection of the load cell duringtransport, but will need to be removed for the scale to operate properly.• It is recommended that the protective screw be re-installed if transporting thescale. Do not over-tighten the protective screw as it may damage the loadcell. To re-install, turn the scale on and place a 500g weight on the pan,then slowly screw in the protection screw until the display shows a valuebetween 250g to 400g.2.3 Selecting the LocationOperate the scale on a firm, level surface. Avoid locations with rapid temperaturechanges, excessive air currents, vibrations, electromagnetic fields, heat or directsunlight.2.4 Leveling the ScaleAdjust the leveling feet until the bubble is centered in the circle of the level indicator(located on the front panel).NOTE: Ensure that the scale is level each time its location is changed.