FrontierTM Centrifuge FC5707 EN-196.2.2 Description of the error message systemThe error message "error" (M11) is shown in the "Time" (A-4) display (See figure 35). Detailed information aboutpossible error messages are in "table 4: error messages" (See Appendix).Figure. 357. RECEIPT OF CENTRIFUGES TO REPAIRHealth risk from contaminated equipment, rotors and accessories.In case of returning the centrifuge for repairing to the manufacturer, please notice the following:The centrifuge must be decontaminated and cleaned before the shipment for the protection of persons,environment and material.A decontamination certificate needs to be filled in and enclosed with any returned goods. (See APPENDIX)We reserve the right to not accept contaminated centrifuges.Furthermore, all costs occurred for the cleaning and disinfection of the units will go to the debit of the customer’saccount.8. TRANSPORT AND STORAGE8.1 TransportOnly transport the unit in the original packaging.Use a transport aid for transporting over longer distances to fix the motor shaft.Air temperature rel. humidity Air pressureGeneral transportation -25 to 60 °C 10 to 75 % 30 to 106 kPa8.2 StorageDuring storage of the centrifuge the following environmental conditions must be observed:Air temperature rel. Humidity Air pressurein transport packaging -25 to 55 °C 10 to 75 % 70 to 106 kPaA-4M11