OHAUS PX125D Instruction Manual

Also see for Pioneer PX124: User guide User guide Instruction manual Instruction manual User guide

OHAUS PX125D Instruction Manual Manual pdf 51 page image

PX Series Balance EN-499.4.2 RS232 (DB9) Pin ConnectionsDiagram Type DescriptionInterface type Voltage interface conforming to EIARS-232C/DIN 66020 (CCITTV24/V.28)Max. cable length 15 mSignal level Output:+5 V ... +15 V (RL = 3 – 7kΩ)-5 V ... -15 V (RL = 3 - 7 kΩ)Input:+3 V ... +25 V-3 V ... -25 VConnector Sub-D, 9-pole, femaleOperating mode Full duplexTransmission mode Bit-serial, asynchronousTransmission code ASCIIBaud rates 1200, 2400, 4800, 9600, 19200,38400 (firmware selectable)Bits/parity 7-bit/even, 7-bit/odd, 7-bit/none,8-bit/none (firmware selectable)Stop bits Stop bit 1, 2Handshake None, XON/XOFF, RTS/CTS(selectable)End-of-line Not selectable9.4.3 USB InterfaceThe Ohaus USB Interface is a unique solution to the problem of connecting a balance to a computer using aUniversal Serial Bus (USB). USB devices are categorized into classes such as disk drives, digital cameras, printers,etc. Balances do not have a commonly used class so the Ohaus USB interface uses a generic interface based onthe RS232 serial standard.Data sent from the balance to a computer is in USB format. The USB data is directed to a virtual port. This portthen appears as an RS232 port to the application program.When sending a command from a computer to the balance, the application program sends a command to thevirtual port as if it were an RS232 port. The computer then directs the command from the virtual port to thecomputers USB connector where the balance is connected. The port receives the USB signal and reacts to thecommand.System Requirementsx PC running Windows 98 ® , Windows 98SE ® , Windows ME® , Windows 2000® , Windows XP ® , Windows 7 ® orWindows 8® (32-bit) or Windows 10 ® .x Available USB port (Type A, 4-pin, female)