OHAUS Scout Series Instruction Manual

Also see for Scout Series: Instruction manual

Contents

OHAUS Scout Series Instruction Manual Manual pdf 12 page image

EN-10 SCOUTTM SERIES BALANCES - SKX4.6 Additional FeaturesWeigh Below HookThe Scout Balance is equipped with a weigh below hook for weighing below the balance.The weigh below hook is located at the reverse side of the battery cover as shown below.To use this feature, remove the red protective cover underneath for the weigh below opening.Attention: Before turning the balance over, remove the Pan and PanSupport (if present), and turn the transportation lock to “locked” position toprevent damage.Figure 4-2. Weigh belowThe balance can be supported using lab jacks or any other convenient method. Ensure thebalance is level and secure and that the transportation lock has been released. Power on theBalance, then use a string or wire to attach items to be weighed.Figure 4-3. Weigh below applicationConnecting the InterfaceUse an optional interface connectivity kit toconnect the balance either to a computer or aprinter.Below Interface kit accessories are available:RS232, USB Host, USB Device, Ethernet,Bluetooth®*.Figure 4-4. Rear of the balance* Interface kits may vary according to local regulationsThe Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. andany use of such marks by OHAUS is under license.Interfaceconnection AC AdapterJackSecurity SlotWeigh Below Hook Weigh Below Hook installedWeigh below opening