OHAUS Scout Series Instruction Manual

Also see for Scout Series: Instruction manual

Contents

OHAUS Scout Series Instruction Manual Manual pdf 3 page image

SCOUTTM SERIES BALANCES - SKX EN-11. INTRODUCTIONThis manual contains installation, operation and maintenance instructions for the Scout SKXSeries Balances. Please read the manual completely before using the balance.1.1 Definition of Signal Warnings and SymbolsSafety notes are marked with signal words and warning symbols. These show safety issues andwarnings. Ignoring the safety notes may lead to personal injury, damage to the instrument,malfunctions and false results.Signal WordsWARNING For a hazardous situation with medium risk, possibly resulting in injuries ordeath if not avoided.CAUTION For a hazardous situation with low risk, resulting in damage to the device orthe property or in loss of data, or injuries if not avoided.Attention For important information about the product.Note For useful information about the product.Warning SymbolsGeneral Hazard Electric Shock Hazard1.2 Safety PrecautionsCAUTION: Read all safety warnings before installing, making connections, orservicing this equipment. Failure to comply with these warnings could result inpersonal injury and/or property damage. Retain all instructions for futurereference. Verify that the local AC power supply is within the input voltage range printed on the ACadapter’s data label. Only connect the AC adapter to a compatible grounded electrical outlet. Do not position the scale such that it is difficult to disconnect the AC adapter from thepower receptacle. Make sure that the power cord does not pose a potential obstacle or tripping hazard. This equipment is intended for indoor use and should only be operated in dry locations. Operate the equipment only under ambient conditions specified in the user instructions. Do not operate the equipment in hazardous or unstable environments. Do not drop loads on the pan. Only use approved accessories and peripherals. Disconnect power from the equipment before cleaning or servicing. Service should only be performed by authorized personnel.2. INSTALLATION2.1 Installing ComponentsRefer to the illustrations and instructions below to identify and assemble your Scout balancewith its components. All components must be assembled before using the balance.