Page: 70Service Guide PM3410Chapter 3 Maintenance & Disassembly3.3.04 Menu OperationGeneral DescriptionThe Menu is used to customize the printers settings and features.The Menu is made up of a number of groups.Each group has a list of items.Each item has several settings.Menu ModeTo enter Menu Mode, follow this procedure.1. Verify that continuous feed paper is installed.2. Verify that the ribbon is correctly installed.3. Verify that the width of the installed paper matches the paper width menu setting.4. Press PRINT QUALITY and CHARACTER PITCH at the same time to place the printer in Menu Mode.When in Menu Mode, the functions printedbelow the operator panels switches are active.5. Press GROUP until the desired Group prints.6. Press ITEM until the desired Item prints.7. Press SET until the desired setting prints.8. Press EXIT to save the change and exit Menu Mode.Printing the MenuPrinting the Menu provides a reference of current settings.This will help you move through the menu.Okidata STRONGLY RECOMMENDS printing the Menubefore resetting the Menu to factory defaults.To print the Menu, follow this procedure.1. Verify that continuous feed paper is installed.2. Verify that the ribbon is correctly installed.3. Verify that the width of the installed paper matches the paper width menu setting.4. Power ON the printer.5. Press and hold PRINT QUALITY and CHARACTER PITCH at the same time to place the printer inMenu Mode.When in Menu Mode, the functions printedbelow the operator panels switches are active.6. Press PRINT.7. The Menu will print.8. Press EXIT to exit Menu Mode.
