3.1 Calibrate the Creo controllerIntroductionThe external controller is either an EFI (IC303/IC305/IC408), a Creo (IC304/IC304Plus)or an Océ PRISMAsync controller. This procedure describes the calibration of the Creocontroller. At the beginning of the procedure you print a calibration chart that is used tocalibrate the Creo controller.Calibrate the Creo controller1. Click 'Tools' - 'Calibration'.The 'Color Calibration' window opens.2. Print the calibration chart.■ At 'Tray', select the location of the media you use mostly.■ At 'Media Type:', define the media you use mostly.■ At 'Screening:', define the screening you use.The default is 'Dot1'■ At 'Number of copies:', select 5.Use the last print to calibrate.■ Click 'Print'The printer performs an automatic calibration adjustment and makes the prints.[13] Calibration chart settingsChapter 3 - Controller calibration 173.1 Calibrate the Creo controller