■ Click 'Apply'.[47] Apply the measurement for all media?7. Click 'OK'.[48] Calibration successful?8. To calibrate per media, return to step 3 of the 'Print the patches chart' .Note:Follow both the above procedures per screen you use.ResultThe EFI controller is calibrated.Chapter 4 - Printer calibration 434.3 Calibrate the EFI controller

Introduction

Basic system configuration

Why calibration

calibration

Chapter 2 Check the print quality

quality

Chapter 3 Controller calibration

controller

3.1 Calibrate the Creo

Chapter 4 Printer calibration

operation

Oce CS550 Pro User Manual

CS550 Pro

CS6 series Pro


Contents Table Of Contents Introduction Basic system configuration Why calibration calibration Chapter 2 Check the print quality quality Chapter 3 Controller calibration controller 3.1 Calibrate the Creo Chapter 4 Printer calibration operation	■ Click 'Apply'.[47] Apply the measurement for all media?7. Click 'OK'.[48] Calibration successful?8. To calibrate per media, return to step 3 of the 'Print the patches chart' .Note:Follow both the above procedures per screen you use.ResultThe EFI controller is calibrated.Chapter 4 - Printer calibration 434.3 Calibrate the EFI controller Previous Next / 56