10 Troubleshooting10-6 VarioLink 9522 (Version 2)10.3 General problems of PostScriptProblem ResponseA PostScript Error message dis-plays.A search can be made from [https://www.adobe.com/cfusion/support/in-dex.cfm?event=membership&retur-nURL=%2Fcfusion%2Fsupport%2Findex%2Ecfm%3Fevent%3Dportal%26loc%3Den%5Fus&loc=en_us].A PostScript Error message displayswhen attempting to get a printoutfrom any computers are in use.There may be loose connections in the printing system. Recheck all of connec-tions.A PostScript Error message displayswhen attempting to get a printoutfrom a specific application.Error conditions may exist in the application. Try to print out a simple test file.If this also does not succeed, reinstall the application in question.A PostScript Error message displayswhen attempting to get a printoutfrom a specific file.It is possible that the print setting for the file is wrong, that graphics containedin the file are damaged, or that bad elements are contained in the file.Find a print setting that does not cause any PostScript Error message to ap-pear, and try to get a printout. If this fails, save the file as a new file.Fonts cannot be downloaded. It is possible that [Spool Print Jobs in HDD before RIP] is set to [Enable] inPrinter Setting Menu on the copier’s control panel.Set [Spool Print Jobs in HDD before RIP] to [Disable], switch off the copier’smain power, wait 10 seconds or more, switch it back on, and then try down-loading fonts again.For details on how to download fonts, refer to the User’s Guide that comeswith the fonts.Non fixed size paper can not beprinted correctly (Macintosh).The direction in which non fixed size paper is loaded in the copier may be in-correct.Rotate the paper direction 90 degrees and then try printing after changing thesettings of the driver and copier accordingly.
