Control panel settings 6cm3521 6-15Control panel settings Chapter 66.6 Specifying HDD Setting parametersVarious hard disk operations are available, such as those for erasing datafrom the hard disk and for checking the amount of free space on the harddisk.The following parameters are available.!DetailThe following data is erased when the hard disk is formatted.Program destinationsAbbreviated destinationsAuthentication method settingsUser authentication settingsAccount track settingsUser boxesBox settingsDocuments in boxesSecure print user box settingsBulletin board user box settingsTo check the hard disk capacityThe amount of space on the hard disk can be checked.1 In the Administrator Setting screen, touch [Security Setting].2 In the Security Setting screen, touch [6 HDD Setting].Parameter DescriptionCheck HDD Capacity Displays the amount of hard disk space that is used and remainingTemporary Data Over-write SettingSelect either “Mode 1” or “Mode 2” as the method for overwritingdata on the hard disk.Select whether encrypting or overwriting is given priority when thesecurity kit is installed.Overwrite All Data Overwrites all dataHDD Lock Password Specifies the hard disk locking passwordHDD Encryption Setting Specify the setting for encrypting the data on the hard disk.A setting is required only when the security kit is installed.HDD Formatting Formats the hard disk.
